| Recent Major Publications |
- Takashi AKATSU, Shingo NUMATA, Michiyuki YOSHIDA, Yutaka
SHINODA, and Fumihiro WAKAI: Indentation Size Effect on the
Hardness of Zirconia Polycrystals; Fracture Mechanics
of Ceramics Edited by R.C.Bradt et al., Plenum Press, New
York, 14, 13-20 (2005).
- Takashi AKATSU, Shin NAKANISHI, Yasuhiro TANABE, and Eiichi
YASUDA: Stress-Induced Transformation Toughening of an
Alumina/Zirconia Dual-Phase Composite; Phil.Mag, 84,
3741-3754 (2004).
- Takashi AKATSU, Yuji KAWAKAMI, Yasuhiro TANABE, Eiichi
YASUDA, Katsunori YAMADA, and Nobuo KAMIYA: An Irreversible
Disappearance of the Mechanical Loss Peak of an Yttria-Doped
Silicon Nitride; J.Mater.Res., 19, 2532-2535
(2004).
- Mototsugu SAKAI, Takashi AKATSU, and Shingo NUMATA: Finite
Element Analysis for Conical Indentation Unloading; Acta
Mater., 52, 2359-2364 (2004).
- Mototsugu SAKAI, Takashi AKATSU, Shingo NUMATA, and Kenji
MATSUDA: Linear Strain Hardening in Elastoplastic
Indentation Contact; J.Mater.Res., 18,
2087-2096(2003).
- Takashi AKATSU, Kenji SAITO, Yasuhiro TANABE, and Eiichi
YASUDA: Combined Mode-I/II Fracture of Ceramics with
Crack-Face Grain/Whisker Bridging; Phil.Mag.A, 83,
745-764(2003).
- Takashi AKATSU, Yasuhiro TANABE, and Eiichi YASUDA: Effect
of Whisker Content and Dimensions on the R-curve Behavior of
an Alumina Matrix Composite Reinforced with Silicon Carbide
Whiskers; J.Mater.Res., 16, 1919-1927(2001).
- Takashi AKATSU, Yasuhiro TANABE, and Eiichi YASUDA: Crack
Bridging Processes and Fracture Resistance in a Discontinuous
Fiber Reinforced Brittle Matrix Composite; J.Mater.Res.,
14, 1316-1324(1999).
- Takashi AKATSU, Masataka OHSHIMA, Yasuhiro TANABE, Eiichi
YASUDA, Shigehiko YAMADA, and Toyohiko YANO: Work-of-Fracture
of SiC-Whisker Reinforced Al2O3
Composite at Elevated Temperatures; Sci. and Eng. of
Comp. Mater., 7, 231-238(1998).
|
